- What is a CSI format?
- How do you calculate gutters and downspouts?
- How far apart should downspouts be on gutters?
- Are larger downspouts better?
- How many hidden hangers do I need for gutters?
- Where should downspouts be positioned?
- How much does it cost to add a downspout?
- What CSI division is electrical?
- Can you add a downspout to a gutter?
- What are CSI divisions?
- How do you calculate the number of downspouts?
- What angle should gutters be hung?
- What CSI division is wood framing?
What is a CSI format?
Organize your construction specs and project information MasterFormat is a coding system for organizing construction documents, contracts, design specifications, and operational manuals.
It uses specific numbers and associated titles that make up a universal indexing system..
How do you calculate gutters and downspouts?
The 6-in-12 pitch factor (1.1) multiplied by 1,000 yields an effective area of 1,100 square feet. Multiplying that number by the local maximum rainfall intensity (6.8 inches per hour) yields an adjusted square footage of 7,480 square feet. Therefore, this roof should be equipped with 6-inch K-style gutters.
How far apart should downspouts be on gutters?
30 to 40 feetIf we have to sum it up in a single rule, gutters need a downspout around every 30 to 40 feet. For most homes, this means installing spouts at either end of a gutter section.
Are larger downspouts better?
When it comes to downspouts, bigger is better! The larger your downspouts are, the better they can dispel water away from your home. Having downspouts that are too small increase the risk of clogging from organic debris that becomes lodged in them.
How many hidden hangers do I need for gutters?
As a rule of thumb, gutter hangers should be spaced a maximum of three feet away from each other. If you live in a cold climate, your contractor may recommend gutter hanger spacing of two feet apart to account for the additional weight from snow and ice.
Where should downspouts be positioned?
Share: Downspouts form a connection between the roof and the basement of your house….Here are some guidelines for placement of downspouts:As a general rule at least one downspout should be placed per every 40 linear feet of gutter. … Downspouts should not discharge where water may pool close to the house and foundation.More items…•
How much does it cost to add a downspout?
The average cost to install a downspout varies by material, but most cost between $3 and $15 a linear foot. The average downspout is around 12-feet long, making the average cost to install one downspout between $36 and $180. Costs vary due to material, shape, size, and installation type.
What CSI division is electrical?
Division 26Division 26 — Electrical. Division 27 — Communications. Division 28 — Electronic Safety and Security.
Can you add a downspout to a gutter?
You can add a downspout to your gutters with little difficulty. Locate where you want to place your new downspout. Measure from the gutter to the wall of the house and then from the gutter to the ground. These two measurements will give you the approximate amount of straight downspout you will need.
What are CSI divisions?
The 16 Divisions of construction, as defined by the Construction Specifications Institute (CSI)’s MasterFormat, is the most widely used standard for organizing specifications and other written information for commercial and institutional building projects in the U.S. and Canada.
How do you calculate the number of downspouts?
A square inch of downspout can drain 1,200 square feet of roof during a rain with an intensity of one inch per hour. Roof area, the locale’s rainfall intensity and gutter capacity determine how many square inches of downspout are needed. Doubling the number of downspouts halves the required capacity for each.
What angle should gutters be hung?
To ensure that gutters drain properly, make certain they slope (½ inch for every 10 feet) toward a downspout. For gutter runs longer than 40 feet, it’s best to pitch the gutter down from the middle to a downspout at each end.
What CSI division is wood framing?
Division 06 – Wood, Plastics, and Composites Manufacturers Material and product manufacturers relating to Wood, Plastics, and Composites are organized by the product or the material into CSI sections.